- Septic Tanks - Standard and Flatbed
- Sewage Treatment Systems
- Commercial Rainwater Harvesting Tanks & Systems
- Domestic Rainwater Harvesting Tanks & Systems
- GRP Water Tanks - One Piece
Properties in densely populated locations, or in remote areas with no access to mains sewage, have several options for managing their wastewater. One of the most economical and hassle free wastewater management systems are septic tanks. These tanks are designed to hold raw sewage, and allow for natural bio digestion before it is released into the ground.
Septic tanks are very cost effective, easy to install and ideal for domestic, commercial and industrial use. They consist of two or three chambers, into which solid waste settles at the bottom for partial treatment through anaerobic digestion. The effluent is then released into an underground drainage field. For release into water bodies, the effluent must be fully treated in a sewage treatment plant.
The remaining sludge at the bottom of the tank must be removed periodically and sent to a treatment plant, to avoid clogging the soak pit and slowing down the digestion process. Septic tanks are an environmentally friendly method of handling wastewater on site, without the risk of contaminating soil or groundwater.
MP Tank Suppliers are leading suppliers of high quality and durable domestic and commercial septic tanks. Our range of Glass Reinforced Plastic tanks is perfect for use in all terrains and conditions. Made from 100% virgin resin with no chalk fillers, they are a tough, long lasting and cost effective solution to wastewater management.
Advantages of MP Tank Suppliers Septic Tanks
Our Glass Reinforced Plastic tanks are the ideal choice when compared to traditional concrete or steel septic tanks. These old fashioned tanks are heavy and harder to install, requiring more digging, mortar and craftsmanship. Furthermore, they are susceptible to damage by tree roots which bore through concrete, corrosion from exposure to sewage chemicals and rust. This greatly increases the cost of installation, maintenance and repair.
In contrast, our GRP septic tanks are easy and cheap to install and maintain. They therefore cost much less over the long run.
Their advantages include:
•Extra lightweight, making them easy to transport and install
•Keying-in lips and lifting eyes for easy position and anchoring
•Highly resistant to chemical exposure from raw sewage
•Do not rust, corrode or get damaged by plants
•Have an outer protective shell to allow for use in all ground conditions
•Available in onion shape for easy installation
•Low profile tanks available for use in areas with hard rock or high water table
•Can be converted to sewage treatment plants with the addition of an optional conversion unit
•Pedestrian frame and cover as standard
Septic tank technical specifications
MP Tank suppliers provide septic tanks for both commercial and domestic use. They come with optional septic tank filters to reduce suspended solid waste in the effluent, which improves its quality and prolongs the life of the soak away.
They are available in capacities ranging from 2800L all the way to 20000L, depending on your specific requirements. They come either as flat-bottomed onion shaped tanks, or low profile cylindrical tanks with legs for easy anchoring.
The low profile tanks are designed for use in areas with hard rock or with a high water table, where digging a large hole is not practical.
These are the available dimensions and tank capacities:
Onion shaped septic tanks
•110mm inlet and outlet diameter
•1000mm inlet invert distance
•1075 outlet invert distance
•2800L (2780 h x 1870mm)
•3800L (3000 h x 2075mm)
•4500L (3100 h x 2196 mm)
Cylindrical septic tanks
•500mm inlet invert distance
•800mm outlet invert distance
•110mm inlet diameter (2800L,3800L and 4500L)
•160mm inlet diameter (6000L, 8000L, 10000L, 12000L, 14000L, 16000L, 18000L and 20000L)
Sizes (L x W x H):
•2800L (3000 x 1250 x 1750 mm)
•3800L (4000 x 1250 x 1750 mm)
•4500L (2650 x 1600 x 2100 mm )
•6000L (2950 x 1900 x 2400 mm )
•8000L (3640 x 1900 x 2400 mm )
•10000L ( 4200 x 1900 x 2400 mm)
•12000L (5200 x 1900 x 2400 mm)
•14000L (5840 x 1900 x 2400 mm)
•16000L (6700 x 1900 x 2400 mm)
•18000L (7500 x 1900 x 2400 mm)
•20000L (8100 x 1900 x 2400 mm)
All MP Tank Suppliers septic tanks are CE marked and tested to BSEN12566:1 to comply with all health, safety and building regulations. We also offer excellent technical support through our highly trained technicians. All tank specifications are available in high stock levels to meet any magnitude of order.
Call us today on 0333 456 6702 to make your order or to get more information on our domestic and commercial septic tanks.